Stick-on moxa and portable prepared-base units encyclopedia
Compare compact stick-on moxa through the actual body, prepared base, adhesive/liner and packing. This first release organizes the existing buying guide and its development reference, connecting sample records with instructions, private-label scope and destination review.
Material variants · Base records · Comparable sample and pack
We coordinate the selected unit and base questions, supplier records, representative samples, specification and packaging versions, and the agreed quotation and inspection scope.
Where does a stick-on moxa comparison begin? Define the body and total dimensions, actual material, base construction, adhesive/liner and count at every pack level. Compare the same configuration before price. A familiar shape or box count does not establish the same unit, instructions or evidence.
Read the unit, base and packaging guide
01
Specify the moxa body, base and pack
Follow the existing stick-on guide through material variants, unit and base dimensions, adhesive/liner records, sample checks, instructions and a comparable quotation.
Which records define the actual unit?
Separate the moxa body, prepared base and pack. Material and process variants, hollow or vented construction and total versus body dimensions can change the offered configuration. Keep the base’s insulation, vent path, adhesive area, liner and attachment version linked.
MB2B-0003 is an own development reference whose source describes approximately 8 × 35 mm, 50 units per box and 90 boxes per carton. The historical 6.8 × 23 mm/180-piece example and another 50-piece presentation are separate records. Confirm the selected sample and current written offer.
| Layer | Fields to record | Comparison question |
|---|---|---|
| Body | Material/process, diameter, body height, weight and construction. | Are candidates actually the same variant? |
| Base | Diameter, height, insulation, vent path, adhesive area, liner and attachment. | Which assembly version was sampled and assessed? |
| Pack | Count per inner/box/carton, seals, tray, protection and storage statement. | Does the pack protect and identify this actual configuration? |
| Instructions | Language, diagrams, warnings and responsible reviewer. | Do directions match the exact packed unit? |
How do sample checks connect to intended-use questions?
Measure several units, photograph the base from above, side and below, and record alignment after normal transport handling. Count sealed packs, check lot and quantity fields, and keep damage, loose material, moisture and compression observations with the sample version.
Keep assembly and packing checks distinct from qualified assessment for the intended use. The component name or photograph does not establish skin suitability. Competent non-human combustion observations record their setup, ventilation, ignition, timing, sample count and stop decisions. The cited chamber’s unventilated research setup does not approve a selected unit, base or room.
Link the approved sample to the written specification and production checks. Material, base, adhesive, liner, pack or claim changes require the affected review and version control. Detailed sample and inspection methods continue in the chapter’s existing cross-links.
What belongs in a private-label and instruction brief?
Quote label-only, adapted artwork on an existing box and new structural packaging separately. Record product and printed-component minimums, setup/plate/proof/sample fees, sample rounds, unused-pack ownership/storage, artwork responsibility and when changed material or structure affects evidence work.
The CPSC staff guide describes a workflow for developing instructions. Its 2003 date and stated limits remain explicit; it does not prescribe requirements or constitute a CPSC rule. FHSA guidance considers finished-product hazards and foreseeable use for applicability. Match the exact version and presentation to destination review rather than copying a universal label. [1] [2]
Close the inquiry with buyer/channel/destination, unit and base versions, material and adhesive records, dimensions/counts, pack/print scope, languages/instructions, evidence and inspection work, quantities and delivery/cost basis. Assign manufacturer, sourcing, buyer/importer and specialist-provider duties within their agreed scopes; provider credentials do not become Moxa Sourcing credentials.
FAQ: Stick-on moxa, bases and private-label packing
| Question | Practical answer | Read more |
|---|---|---|
| What is a stick-on moxa unit? | The guide describes a compact moxa body attached to a prepared base. Identify the actual material, body construction, base, adhesive, release liner and pack. The name does not define one standard size or construction. | Specify the moxa body, base and pack |
| Which dimensions should be stated separately? | Record unit diameter and total height, moxa-body height, base diameter and height, insulation, vent path and adhesive area. Add weight, tolerances and a photograph or drawing of the actual version. | Specify the moxa body, base and pack |
| What does the MB2B-0003 development source describe? | The source describes approximately 8 × 35 mm per unit, 50 units per box and 90 boxes per carton. Confirm the actual body, base, material and count against the selected sample and written offer. Historical 6.8 × 23 mm/180-piece and other 50-piece examples are separate configurations. | Specify the moxa body, base and pack |
| Are natural and lower-smoke units equivalent? | Keep them as distinct variants until material and process are defined and samples compared. A common stick-on shape does not establish equivalent odor, smoke, combustion or instructions. | Specify the moxa body, base and pack |
| Do an adhesive name or non-human check establish skin-contact suitability? | Keep the base, adhesive, liner and attachment version with the moxa-body record. Assembly/packing observations and any qualified intended-use assessment answer different questions. A photograph, component name or non-human comparison does not establish finished-unit skin suitability or clinical safety. | Specify the moxa body, base and pack |
| Which sample observations should be retained? | Record multiple-unit dimensions and weight, body/base alignment, liner/vent construction, counts, loose material, damage, lot fields, pack protection and instructions matching the actual unit. Retain the approved version and agreed methods and defect criteria. | Specify the moxa body, base and pack |
| Is there one standard count or private-label MOQ? | The guide includes historical 50-, 180- and 200-piece examples, not one count standard. Separate product, printed-component, setup and unused-pack terms for label-only, adapted artwork or a new pack structure. Confirm a dated quotation for the selected version. | Specify the moxa body, base and pack |
| Does a CPSC instruction guide settle the final label? | The October 2003 staff guide supports instruction development, states its limits and is not a CPSC rule. FHSA applicability depends on finished-product hazards and foreseeable use. Assign the selected product’s destination and final wording review to the responsible market party with qualified support. | Specify the moxa body, base and pack |
Comparing a stick-on unit, base or packing option?
Ask about the material, dimensions, base, adhesive records, samples or private-label pack. Start with your question; the current page is included.
Sources and further reading
The chapter retains its original product images, source-provided facts, instructions and warnings, private source mappings and historical examples. Development-reference dimensions and counts require selected-sample and offer confirmation. Other portable devices, loose formed units and non-burning warming products retain their own topic boundaries.
- CPSC staff: Manufacturer’s Guide to Developing Consumer Product Instructions — October 2003 guide; cover, limitations andinstruction-development scope rechecked 15 November 2026. Not a rule or mandatory label template.
- CPSC: FHSA Cautionary Labeling — Official body rechecked 15 November 2026. Finished-product hazards and foreseeable use determine applicability; not blanket classification.
- Commercial Indirect Moxa: Chamber Emissions Study — Specific products, apparatus and extrapolation limits; not unventilated buyer-trial directions or selected-unit safety approval.