OEM / private label · Multi-factory sourcing · Export project coordination
sales@moxasourcing.comCall UsChat on WhatsApp

Gourd Moxibustion Smoke Capture and Treatment

Distinguish smoke capture, hose transport, outdoor discharge and treatment equipment when planning a complete gourd moxibustion setup.

Frequently asked questions

How do capture and final smoke destination differ?

Distinguish where smoke is captured from where it finally goes. A side hose begins at the outlet. An overhead hood collects the plume near the tool without necessarily connecting to the outlet. Either collection method may lead to outdoor discharge or treatment equipment. A hood, fan and purifier describe different functions.

Which general ventilation principles does INRS support?

INRS guidance supports capture close to emission, effective distribution of airflow and adequate replacement air. Discharge should avoid fresh-air intakes. It also says treatment performance must be checked and does not remove the need for room ventilation. Apply these general principles through a competent assessment of the actual installation. [7]

Why must airflow be checked with the actual hoses?

Ask for performance with the actual hose length, bends and simultaneous branches. A no-load maximum airflow is not the installed flow at every tool. Check leakage, kinks, deposited ash and changes in suction. Extraction can change the combustion and local heat environment, so fit and operating behaviour need to be checked together.

What evidence is needed for treatment and recirculation?

For treatment units, identify the pollutants addressed, filtration or adsorption stages, any catalytic process, relevant test conditions, maintenance and residual emissions. A catalyst label, a report thumbnail or a claim such as no filters does not establish indoor recirculation conditions or maintenance-free service. The supplied promotional diagrams do not prove a capture or removal percentage.

RouteComponents to identifyWhat must be confirmed
Powered outdoor dischargeTool or hood → duct → fan → outdoor endpointInstalled suction, makeup air, endpoint, neighbouring exposure and installation permission.
Treatment before dischargeCollection → treatment unit → verified discharge pathActual model, process, suitable tests, maintenance and final destination.
Indoor recirculationCollection → treatment → roomResidual pollutants, verified recirculation conditions and ventilation; absence of visible smoke is insufficient.

Sources and scope

  1. INRS: collective protection and source capture

Complete source register and scope notes

Chat on WhatsApp+852 5725 4301